hi at all!,
i have a problem using fc v3 and a 16x4 display..
it's has worked until last week, then i have installed fc into another pc and now on the first and second row avery things it's correct but when i want to write something on 3° or 4° row i can't write from the begin... for example if i put the cursor in "0,2" or "0,3" , when i send the program into ecio40
i find my text in "6,2" or "6,3"...
during the simulation in fc works fine..
how can i solve it?
thanks!
display problem
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: display problem
Hello Franky
What version of Flowcode 3 are you running? It could be that you need to update to the latest version (3.6) to allow the LCD to work correctly.
You can find the latest version of v3 available from here.
http://www.matrixmultimedia.com/support ... f=16&t=541
What version of Flowcode 3 are you running? It could be that you need to update to the latest version (3.6) to allow the LCD to work correctly.
You can find the latest version of v3 available from here.
http://www.matrixmultimedia.com/support ... f=16&t=541
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: display problem
hi benj,
my version is 3.4, i'll try to install the last one
thank you very much!
my version is 3.4, i'll try to install the last one
thank you very much!