Hello
In the " FCD_02e3_RS232__Initialise();" is a bug.
All settings in the RS232 properties are not effectively.
You can the Makro "RS232 Initialise" replace with my Makro "Init_RS232_33FJ128GP802"
Microcontroller: 33FJ128GP802
HjH
Bug in RS232 Makro
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Bug in RS232 Makro
Hello HJH.
Do you know which settings are not being setup correctly using the standard Initialise macro? Also which version are you using? 6.0.3 is the latest release and contains the latest set of fixes.
I have also just done a lot of work at getting the devices/components with remappable I/O to work correctly and expose the remapping via the component properties. All working very nicely now and should be complete for 6.0.4 which will be released shortly.
Do you know which settings are not being setup correctly using the standard Initialise macro? Also which version are you using? 6.0.3 is the latest release and contains the latest set of fixes.
I have also just done a lot of work at getting the devices/components with remappable I/O to work correctly and expose the remapping via the component properties. All working very nicely now and should be complete for 6.0.4 which will be released shortly.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel