Been developing a program for the 18F2455 using flowcode 6 and it had been going well. Gone through about 10 saved versions as I progressed and up until now all compiled and built on chip and worked to an improving degree.
Then I started getting compile errors of 'could not open' xc.h and math.h. At first I thought I had screwed up the program but have gone back to earlier versions of the programs which used to compile ok and work but now get the same error.
I can not find XC.h, but no idea what's going on or how to recover.
Can anyone help please?
Compile error missing XC.h & math.h Flowcode 6
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Compile error missing XC.h & math.h Flowcode 6
Hello,
Have you done anything with your compiler settings?
Or have you done anything with the compiler on your file system?
Flowcode 6 for PIC uses the BoostC compiler, have you done anything specific with this.
If all else fails it might be worth uninstalling and reinstalling Flowcode or reparing the installation.
Have you done anything with your compiler settings?
Or have you done anything with the compiler on your file system?
Flowcode 6 for PIC uses the BoostC compiler, have you done anything specific with this.
If all else fails it might be worth uninstalling and reinstalling Flowcode or reparing the installation.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel