Request to have Flowcode 6 work on Linux using Wine or Crossover. Ideally including BoostC, however if this can not be done because of the copy protection mechanism using by SourceBoost having FC6 with the other compilers (and in the future may-be xc) would be greatly appreciated.
Current FC6 version crashes during start-up, before anything is displayed.
FC6 on Wine/Crossover on Linux
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
-
kersing
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
FC6 on Wine/Crossover on Linux
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: FC6 on Wine/Crossover on Linux
I would like to see this too. Running Flowcode on a Raspberry Pi or Android device would be very nice indeed.
Flowcode currently relies quite heavily on MFC code so might be worth checking you have all the latest Microsoft libraries installed into Wine to have the best chance of making it work.
Flowcode currently relies quite heavily on MFC code so might be worth checking you have all the latest Microsoft libraries installed into Wine to have the best chance of making it work.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: FC6 on Wine/Crossover on Linux
I also would like to run Flowcode on linux, it'd be a very useful feature !