Hello to you,
can you arrange the support in flowcode for a PIC16F1829LIN?
Is the PIC16F1829 + LIN-Component working by using the 16F1829LIN or do I need a new CAL-File?
We want to use this controller for new projects in the next weeks.
Best regards
J. Güldner
Support for 16F1829LIN
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
-
Jörg Güldner
- Posts: 77
- Joined: Wed Jun 22, 2011 3:32 pm
- Has thanked: 17 times
- Been thanked: 11 times
- Contact:
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Support for 16F1829LIN
Hello,
The LIN component is not ideal and should probably not be used at the moment as it is all bit banged.
I have seen some good examples using a fixed baud and the hardware UART, so the RS232 component might be the easiest to get LIN comms up and running.
We have no current support for auto baud but you should be able to do this using a C icon to manipulate the device registers.
The LIN component is not ideal and should probably not be used at the moment as it is all bit banged.
I have seen some good examples using a fixed baud and the hardware UART, so the RS232 component might be the easiest to get LIN comms up and running.
We have no current support for auto baud but you should be able to do this using a C icon to manipulate the device registers.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
Jörg Güldner
- Posts: 77
- Joined: Wed Jun 22, 2011 3:32 pm
- Has thanked: 17 times
- Been thanked: 11 times
- Contact: