mLoader does not work (reliable) when HID devices are present on the USB bus. New computers may have HID devices embedded (example), interfering with mLoader. Please fix mLoader to allow it to work with HID devices connected.
Other examples of devices known to interfere with mLoader are Bluetooth dongles and Leap motion sensors.
mLoader & HID devices
Moderator: Benj
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
mLoader & HID devices
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: mLoader & HID devices
Hi Jac,
I believe we are changing mLoader so it only responds to devices with our vendor ID 0x12BF. I will double check this is still happening.
I believe we are changing mLoader so it only responds to devices with our vendor ID 0x12BF. I will double check this is still happening.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: mLoader & HID devices
Potential fix for the problem posted here: http://www.matrixtsl.com/mmforums/viewt ... 703#p67703
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel