hi,
has you can see, I can't compile. I registered my copy a few days ago but never try to compile before.
Device: PIC.18F.18F2523
Generated by: Flowcode v6.1.3.2
Date: Tuesday, April 05, 2016 17:19:31
Users: 1
Registered to: enac-dfpv-simu
Licence key: "removed for web "
http://www.matrixtsl.com
Lancement du compilateur...
C:\Program Files\Flowcode 6\compilers\pic\boostc\boostc_18F.exe -v -t PIC18F2523 "minuterie18Fv0.01_v6.c"
Vous n'avez pas de licence valide pour effectuer cette action
same for other device like 16f876.
thanks
can't compile (Resolved)
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: can't compile
Hello,
Please can you try activating the software again using Help -~> Activate. You should get a Windows popup window appear which you need to click Yes to allow it to run and apply the BoostC license.
Please can you try activating the software again using Help -~> Activate. You should get a Windows popup window appear which you need to click Yes to allow it to run and apply the BoostC license.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: can't compile
Ok, it was a licence probleme.
Our buying service didn't buy the pic licence.
Now it's OK
Thank's
Our buying service didn't buy the pic licence.
Now it's OK
Thank's