Hi,
I have just purchased the AVR multiprogrammer bundle containing a ATMEGA324p device. I have attempted to load a simple LED count program, with target device set to ATMEGA324, and it that keeps failing, see attached for the error message. It seems to be expecting the target device ATMEGA324p which isnt available from the drop down list
I can compile the code with Target set to ATMEGA32 device, but this wont program with it being the wrong device.
Please advise of a solution to this.
EB0019 Programming problem
Re: EB0019 Programming problem
I have managed to rectify this problem by referring to the following topic;
http://www.matrixmultimedia.com/mmforum ... 24p#p10963
Thanks
http://www.matrixmultimedia.com/mmforum ... 24p#p10963
Thanks
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB0019 Programming problem
Hello Waitsy
Great thanks for letting us know your all up and running now and confirming our workaround.
Great thanks for letting us know your all up and running now and confirming our workaround.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel