Hello,
With Flowcode5, you could quickly copy and paste the programming parameters of a chip:
How to do with Flowcode7, the parameter "Download configuration now" is grayed out?
And yet, as on Flowcode5, I did not activate the external programmer ...
Thanks for your help.
Bruno
Manually configuring the chip for PICmicros
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Manually configuring the chip for PICmicros
Hi Bruno,
The send configuration settings now option is for AVR devices as the configuration settings do not get packed into the output hex file.
For PIC devices the configuration is packed into the hex file for you and so gets assigned when programming the device.
The send configuration settings now option is for AVR devices as the configuration settings do not get packed into the output hex file.
For PIC devices the configuration is packed into the hex file for you and so gets assigned when programming the device.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel