Hi Ben
If I configurate the UART with the corect Pin for RX = F2 and TX= F8. After save and close/open again, the Pin for RX/TX change to A14/A15.
Thats confusing....
And I dont understand why RX/TX remable is showing
Pin configuration change after save/close/open
Moderator: Benj
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Pin configuration change after save/close/open
Hello Stefan,
Many thanks for letting us know.
I've had a bit of a go with the component and now think that I've solved the problem for you.
Simply copy the attached into your "Flowcode 7/Components" directory and restart Flowcode.
Let us know how you get on.
Many thanks for letting us know.
I've had a bit of a go with the component and now think that I've solved the problem for you.
Simply copy the attached into your "Flowcode 7/Components" directory and restart Flowcode.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: Pin configuration change after save/close/open
Hi Ben
Perfect. it's ok now.
Another idea of the serialport....
Can you support in the selector
230400Bd
460800Bd
921600Bd
And can you include in the software uart a very simple IRQ like in the hardware uart?
Perfect. it's ok now.
Another idea of the serialport....
Can you support in the selector
230400Bd
460800Bd
921600Bd
And can you include in the software uart a very simple IRQ like in the hardware uart?