FC7 crash and not program

A forums to allow bugs and problems with Flowcode v7 to be reported and resolved.

Moderator: Benj

luibra63
Posts: 34
Joined: Mon Aug 29, 2016 3:21 pm
Has thanked: 3 times
Been thanked: 6 times
Contact:

FC7 crash and not program

Postby luibra63 » Mon Jul 02, 2018 8:38 am

Hi
I have a big problem with flowcode7. Last month i realized a new program and I programming my card arduino mega and work perfectly.In this moment I open the same project and when I try programming card with flowcode7 this crashing, don't programming and automatically close flowcode
this same problem I have in other computer.All computer have a windows10
do you have an idea?
is it possible that it happened after a windows 10 upgrade?

best regards

User avatar
LeighM
Matrix Staff
Posts: 1844
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 429 times
Been thanked: 612 times
Contact:

Re: FC7 crash and not program

Postby LeighM » Mon Jul 02, 2018 8:55 am

Hi,
What do you mean by "Crash"?
Do you get any error messages?
It could be Windows 10 anti-virus, see this post ...
viewtopic.php?f=76&t=20130&p=88565&hilit=bitdefender#p88564

luibra63
Posts: 34
Joined: Mon Aug 29, 2016 3:21 pm
Has thanked: 3 times
Been thanked: 6 times
Contact:

Re: FC7 crash and not program

Postby luibra63 » Mon Jul 02, 2018 9:27 am

Hi
Yes Ihave installed antivirus in my pc but the problem also exist when antivirus in desable mode

I installed the fc7 in other pc with different antivirus and the problem is same.

when I realized my program, flowcode work in simulation, compile and generate "hex" file., but when I "Press OK to continue" for insert program in my arduino mega card,after 5 second appear the windows message. (show the pdf file)
(sorry for my english)
Attachments
screenshot.pdf
(174.32 KiB) Downloaded 45 times

User avatar
LeighM
Matrix Staff
Posts: 1844
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 429 times
Been thanked: 612 times
Contact:

Re: FC7 crash and not program

Postby LeighM » Mon Jul 02, 2018 1:34 pm

Hi,
Is the Arduino USB to virtual com port installed OK?
When you connect the Arduino board, Windows should allocate a COM port for it,
and should be visible in "Devices and Printers" settings.
This COM port (e.g. COM10) has to be entered on the Build->Project options screen of Flowcode

This thread might also be of help ...
viewtopic.php?f=78&t=20145&p=88677#p88677

luibra63
Posts: 34
Joined: Mon Aug 29, 2016 3:21 pm
Has thanked: 3 times
Been thanked: 6 times
Contact:

Re: FC7 crash and not program

Postby luibra63 » Mon Jul 02, 2018 2:17 pm

Hi LeighM
I tried running Windows in safe mode, but not program.
I tried replace "avrc_arduinoA.bat" in C:\Program Files (x86)\Flowcode 7\compilers, but not program
when I conect the arduino card show a driver (look pdf attacted). The same problem are with mega and nano arduino card.
I try reinstalling flowcode7? is it possible? , first remove old fc7 in my pc?
how many installations can I do without problems?
thanks
Attachments
com_port.pdf
(65.08 KiB) Downloaded 32 times

User avatar
LeighM
Matrix Staff
Posts: 1844
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 429 times
Been thanked: 612 times
Contact:

Re: FC7 crash and not program

Postby LeighM » Mon Jul 02, 2018 3:57 pm


luibra63
Posts: 34
Joined: Mon Aug 29, 2016 3:21 pm
Has thanked: 3 times
Been thanked: 6 times
Contact:

Re: FC7 crash and not program

Postby luibra63 » Mon Jul 02, 2018 11:22 pm

Hi LeighM
thankyou for your support.
I removed FC7 from my pc and reinstall version 7.3.0.5 and it work perfectly. Is this latest vrsion or exist a other version?
I don't understand because two different computer present same defect in same moment. This is principal computer I use every day but flowcode7 was 20 day not used. the other pc I use sometime but in the same moment present same defect have you an idea?
Best regards

User avatar
Benj
Matrix Staff
Posts: 14150
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4330 times
Been thanked: 4078 times
Contact:

Re: FC7 crash and not program

Postby Benj » Thu Jul 05, 2018 1:12 pm

Hello,

The latest v7.3 updates can be found here to bring you fully up to date.
viewtopic.php?f=63&t=19743

luibra63
Posts: 34
Joined: Mon Aug 29, 2016 3:21 pm
Has thanked: 3 times
Been thanked: 6 times
Contact:

Re: FC7 crash and not program

Postby luibra63 » Wed Jul 11, 2018 9:55 am

thankyou Benj
best regards