I'm working with a PIC16F18877 - TQFP44.
The Peripheral Pin Select (PPS) module is working OK?
I have troubles to remap the SPI CH1 and SPI CH2.
Please see this topic:
viewtopic.php?f=68&p=95426#p95426
Thanks
PPS bug?
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: PPS bugs
Hello,
The code in the latest v7 16F18877 definition file looks ok to me compared to the v8 files.
viewtopic.php?f=63&t=19743
Which pins are you trying?
The code in the latest v7 16F18877 definition file looks ok to me compared to the v8 files.
viewtopic.php?f=63&t=19743
Which pins are you trying?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- fotios
- Posts: 458
- Joined: Mon Feb 08, 2010 10:17 am
- Location: Greece
- Has thanked: 109 times
- Been thanked: 117 times
- Contact:
Re: PPS bugs
Hi BenBenj wrote:Hello,
The code in the latest v7 16F18877 definition file looks ok to me compared to the v8 files.
viewtopic.php?f=63&t=19743
Which pins are you trying?
Thanks for the confirmation.
RB.1 = SCK_2
RB.2 = MOSI_2
RB.3 = MISO_2
RB.4 = SS_2
I had ordered two RF-Solutions LoRa modules, based on Semtech SX1272, and I developed the FCF for that chip.
Unfortunately, my technical director ordered and shipped to me the new series modules (identical to the old modules) that incorporate the Semtech SX1262 which is completely different.
I will modify the FCF and let you know if the P16F18877 PPS module is working OK.
Best Regards FOTIS ANAGNOSTOU
- fotios
- Posts: 458
- Joined: Mon Feb 08, 2010 10:17 am
- Location: Greece
- Has thanked: 109 times
- Been thanked: 117 times
- Contact:
Re: PPS bug?
Hi everyone
The definitions of the PPS module are correct, without bugs within FC7.
Just now I modified the FCF to fit on SX1262 which of the Register map and Read/Write access is completely different from this of SX1272.
Thanks for the help
The definitions of the PPS module are correct, without bugs within FC7.
Just now I modified the FCF to fit on SX1262 which of the Register map and Read/Write access is completely different from this of SX1272.
Thanks for the help
Best Regards FOTIS ANAGNOSTOU