Hi All
Can there be more options to adjust the internal CANBUS speed? For example; 25, 50 kb/s or manually adjustable
These low speeds are used in the lift industry.
Adjustable CANBUS speed
Moderator: Benj
- celebriums
- Posts: 125
- Joined: Sun Sep 25, 2016 3:50 pm
- Has thanked: 71 times
- Been thanked: 33 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Adjustable CANBUS speed
Hi Sadik,
I've had a quick go for you at adding the new baud rates you suggested.
Simply copy the attached files into your "Flowcode 7/Components" folder and restart Flowcode and the new rates should now be available in the drop down list when selecting an internal CAN channel.
Let us know how you get on with them.
I've had a quick go for you at adding the new baud rates you suggested.
Simply copy the attached files into your "Flowcode 7/Components" folder and restart Flowcode and the new rates should now be available in the drop down list when selecting an internal CAN channel.
Let us know how you get on with them.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- celebriums
- Posts: 125
- Joined: Sun Sep 25, 2016 3:50 pm
- Has thanked: 71 times
- Been thanked: 33 times
- Contact:
Re: Adjustable CANBUS speed
Hi Benj
I hope your fine. Thank you very much for your quick support.
I will share the results with you once you have.
I hope your fine. Thank you very much for your quick support.
I will share the results with you once you have.