Hi,
I tried to use the TCP/IP ENC28J60 component in my PIC24FJ64GA (44pin) project.
According to the PIC datasheet all SPI I/O is remappable.
For the first channel I/O is fixed on port-B, except Reset and CS.
The second channel is remappable but when selecting a pin the select tree is empty.
Software select does work.
My I/O is fixed in the design and I can not use channel 1. Can this component be fixed for remapping using channel-2?
Regards,
P.S.
ENC28J60 component remap does not work with PIC24FJ64GA
Moderator: Benj
-
- Posts: 74
- Joined: Mon Aug 23, 2010 7:07 pm
- Location: Amsterdam
- Has thanked: 7 times
- Been thanked: 13 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: ENC28J60 component remap does not work with PIC24FJ64GA
Hello,
Which chip specifically are you using. Some chips have remappable SPI 1, 3 and 4 but channel 2 is not remappable.
Which chip specifically are you using. Some chips have remappable SPI 1, 3 and 4 but channel 2 is not remappable.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel