Hi
FC7 (free)
Not sure it this is an actual bug or by design - when I connect up some panel LEDS the a label just above the component appears which displays the port and pin number - (VERY USEFUL by the way!!).
Now, I've put two switches and two solenoids on the dashboard but no label is displayed (or available in properties) even though they are connected and operational in simulation
If this is by design could you please bump it to requested features cos its brilliant
Matt
Labels
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Labels
Hi Matt,
I'll look into it and see if the labels can be added. Shouldn't be a big job hopefully.
I'll look into it and see if the labels can be added. Shouldn't be a big job hopefully.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Labels
I've put together a bit of an example here which should help.
http://www.matrixtsl.com/wikiv7/index.p ... f191783aa0
http://www.matrixtsl.com/wikiv7/index.p ... f191783aa0
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel