Evening All,
I know not quite the place to ask but - you never know
Looking for a line choke / reactor for a centre tapped single phase supply (55 - 0 - 55) V AC to remove the 3rd and 5th harmonic from a switchmode power supply PSU 350W
Measured a 12 amp 3rd harmonic the 5th was not fair behind on no load on the PSU.
Any one got any idea's
looking for something like this style
https://www.schaffner.com/products/down ... rformance/
Steve
EMC Filter
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: EMC Filter
Morning
https://admagnetics.co.uk/
they manufacture line chokes - two 150mH did the trick 1 fitted to the Live & 1 fitted to the neutral
Steve
https://admagnetics.co.uk/
they manufacture line chokes - two 150mH did the trick 1 fitted to the Live & 1 fitted to the neutral
Steve
Success always occurs in private and failure in full view.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EMC Filter
Hi Steve,
Excellent, thanks for letting us know. Well done, removing these type of issues can be tricky.
Excellent, thanks for letting us know. Well done, removing these type of issues can be tricky.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel