Hi
When using the Momentary Push Button Array component there appears to be an issue with the lowest "position".
When using the component, all switches except the lowest behave as expected. When depressed the associated "led" illuminates and extinguishes when released. With the lowest, the LED appears to latch. Subsequent presses may or may not register but pressing any other button brings status to that expected, until the lowest is pressed again.
Regards
Edit--
This seems to affect the slide switch array too and also affects the returned value if port is read.
Push Button Array Issue
Moderator: Benj
-
- Valued Contributor
- Posts: 740
- Joined: Fri Jun 06, 2014 3:53 pm
- Has thanked: 185 times
- Been thanked: 204 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Push Button Array Issue
Thanks for letting us know. We have found the cause of the problem and are working on a fix.
Hopefully we can have it solved quickly for you.
Hopefully we can have it solved quickly for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Push Button Array Issue
Hello,
The problem has hopefully now been resolved and the updates are now available via the help -> check for updates menu.
Let us know how you get on.
The problem has hopefully now been resolved and the updates are now available via the help -> check for updates menu.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 740
- Joined: Fri Jun 06, 2014 3:53 pm
- Has thanked: 185 times
- Been thanked: 204 times
- Contact:
Re: Push Button Array Issue
Hi Benj
Many thanks and although due to travel I can't test it yet, I have no doubt you guys have resolved.
Regards
Many thanks and although due to travel I can't test it yet, I have no doubt you guys have resolved.
Regards