While debugging a component the pins do always not have to be connected which results in a message when trying to simulate. While the warning is very useful when creating a flow chart for deployment on a controller, it is annoying during the component debugging phase.
Please make this warning configurable for each flowchart.
Make pins not connected warning optional
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Make pins not connected warning optional
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Make pins not connected warning optional
Hi Jac,
What about a button which is something along the lines of "don't warn me again this session".
What about a button which is something along the lines of "don't warn me again this session".
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: Make pins not connected warning optional
Hi Ben,
I prefer it to be a setting for a flowchart. When working on a component and code using the component you want the warning while working on the later. Based on that you want to re-enable the warning when loading another flowchart, not when restarting FC. However, when switching between flowcharts often (which I currently do) it doesn't help a lot when it gets reset every reload. So a session based setting would help me shoot in my own foot or not be very effective.
Jac
I prefer it to be a setting for a flowchart. When working on a component and code using the component you want the warning while working on the later. Based on that you want to re-enable the warning when loading another flowchart, not when restarting FC. However, when switching between flowcharts often (which I currently do) it doesn't help a lot when it gets reset every reload. So a session based setting would help me shoot in my own foot or not be very effective.
Jac
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- JonnyW
- Posts: 1230
- Joined: Fri Oct 29, 2010 9:13 am
- Location: Matrix Multimedia Ltd
- Has thanked: 63 times
- Been thanked: 290 times
- Contact:
Re: Make pins not connected warning optional
Hi. If you are developing your own component for this try:
http://www.matrixmultimedia.com/wiki/in ... nconnected
Note the property name is empty at the moment - I haven't got that sorted yet. If you do:
.Return = 1
It should skip any warnings.
Jonny
http://www.matrixmultimedia.com/wiki/in ... nconnected
Note the property name is empty at the moment - I haven't got that sorted yet. If you do:
.Return = 1
It should skip any warnings.
Jonny
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: Make pins not connected warning optional
Hi Jonny,
Disable works fine. Combined with Component::GetInstance the perfect solution. Thanks!
Jac
Disable works fine. Combined with Component::GetInstance the perfect solution. Thanks!
Jac
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis