Hi Guys
I am trying to get the hang of V6 simulation what i have is a master and slave now im trying to get the 2 to talk to each other Via RS232 but cant find the Vnet or in v6 is it different ? Another thing If i want to sed characters in the RS232 Component, In V 5 you had a characters in Queue section how do i do the same thing in V6
Thanks
Brian
Simulating 2 programs
Moderator: Benj
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: Simulating 2 programs
Take a look at the injector functionality. For two programs to exchange data you need the Vnet injector.
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- jollybv
- Flowcode v5 User
- Posts: 374
- Joined: Thu Feb 12, 2009 5:20 am
- Location: Cape Town
- Has thanked: 81 times
- Been thanked: 25 times
- Contact:
Re: Simulating 2 programs
Hi Guys
I'm still battling with the V6 vnet injector set everything as should be but the injector dose not come up with the local IP address is there something im doing wrong or do I have a bug as I have never been able to simulate in V6
Brian
I'm still battling with the V6 vnet injector set everything as should be but the injector dose not come up with the local IP address is there something im doing wrong or do I have a bug as I have never been able to simulate in V6
Brian
- Attachments
-
- Screenshot 2014-12-16 09.52.08.png
- (1.29 MiB) Downloaded 744 times
-
- Screenshot 2014-12-16 09.39.49.png
- (1.11 MiB) Downloaded 744 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Simulating 2 programs
Hello Brian,
From your pictures the interface property is blank. This should allow you to select your network interface which is needed even if you are simply communicating on the same PC. Are there any valid options you can select for this property?
From your pictures the interface property is blank. This should allow you to select your network interface which is needed even if you are simply communicating on the same PC. Are there any valid options you can select for this property?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- jollybv
- Flowcode v5 User
- Posts: 374
- Joined: Thu Feb 12, 2009 5:20 am
- Location: Cape Town
- Has thanked: 81 times
- Been thanked: 25 times
- Contact:
Re: Simulating 2 programs
Hi Benj
No there is nothing i can select in the Interface drop down menu its blank
No there is nothing i can select in the Interface drop down menu its blank
- Attachments
-
- Screenshot 2014-12-17 06.56.37.png
- (109.17 KiB) Downloaded 722 times
- jollybv
- Flowcode v5 User
- Posts: 374
- Joined: Thu Feb 12, 2009 5:20 am
- Location: Cape Town
- Has thanked: 81 times
- Been thanked: 25 times
- Contact:
Re: Simulating 2 programs
Hi guys
Is there any one out there that can help me get my VNet to work? I have tried to change the interface but the drop-down box is empty, is this a bug in the program or am i doing some thing stupid Also the Local IP is set to 0 please help
Brian
Is there any one out there that can help me get my VNet to work? I have tried to change the interface but the drop-down box is empty, is this a bug in the program or am i doing some thing stupid Also the Local IP is set to 0 please help
Brian
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Simulating 2 programs
Hello Brian,
What network interfaces do you have available on your PC and are they enabled in device manager and connected?
I get this on my Dev PC which points to the network interface.
On my laptop I can select the Wifi interface and then when there is also a cable connected I get the option in the network interface drop down to select that also.
What network interfaces do you have available on your PC and are they enabled in device manager and connected?
I get this on my Dev PC which points to the network interface.
On my laptop I can select the Wifi interface and then when there is also a cable connected I get the option in the network interface drop down to select that also.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- jollybv
- Flowcode v5 User
- Posts: 374
- Joined: Thu Feb 12, 2009 5:20 am
- Location: Cape Town
- Has thanked: 81 times
- Been thanked: 25 times
- Contact:
Re: Simulating 2 programs
Hi Benj
If i go into device manager I only see my network adapter, but this dose not come up in the network interface drop-down menu
If i click on the network interface drop-down menu in FC it there is no options to choose from (see screenshot below I'm clicked on the Interface). On my laptop its the same dose not show me any networks so really not sure what to do as i have a WiFi connection on the laptop that is working but i can't detect it either.
My only thought is that maybe my copy of flowcode lost some files or something got corrupt when it was downloading?? Is there any way i could get a working copy of the Vnet injector.
If i go into device manager I only see my network adapter, but this dose not come up in the network interface drop-down menu
If i click on the network interface drop-down menu in FC it there is no options to choose from (see screenshot below I'm clicked on the Interface). On my laptop its the same dose not show me any networks so really not sure what to do as i have a WiFi connection on the laptop that is working but i can't detect it either.
My only thought is that maybe my copy of flowcode lost some files or something got corrupt when it was downloading?? Is there any way i could get a working copy of the Vnet injector.
- Attachments
-
- Network Interface.png
- (27.51 KiB) Downloaded 2786 times
-
- Screenshot 2014-12-18 15.36.47.png
- (64.58 KiB) Downloaded 2786 times
- jollybv
- Flowcode v5 User
- Posts: 374
- Joined: Thu Feb 12, 2009 5:20 am
- Location: Cape Town
- Has thanked: 81 times
- Been thanked: 25 times
- Contact:
Re: Simulating 2 programs
Hi Guys
Please i need help here as a have a bit of time over this period to get stuck into my project and debug it
Please i need help here as a have a bit of time over this period to get stuck into my project and debug it