Flowcode and hardware (slightly off topic)
Moderator: Benj
-
- Posts: 71
- Joined: Fri Jul 31, 2015 9:21 pm
- Has thanked: 2 times
- Been thanked: 12 times
- Contact:
Flowcode and hardware (slightly off topic)
Hi all.
Have great success with FC and tinkering around with Arduinos I was thinking about how I used to develop the whole board from scratch then program up PIC chips. It got me to thinking would I go down that track again for various projects. Most of my stuff around home I use arduinos but.....
If I wanted to just use a microprocessor as part of another circuit/board I have the option of making a shield and plugging it in or simply programming up a chip
I then went and looked around for bits and pieces and micros in DIP format (I cant see well enough for smaller than that) and then came across things like
http://www.robot-electronics.co.uk/htm/dev-p182432.htm
So my question is what is compatible with FC6 that either via an adapter or in dip package that has 32 bit processor and lots of io's? I cant be the only one thats nearly blind
Have great success with FC and tinkering around with Arduinos I was thinking about how I used to develop the whole board from scratch then program up PIC chips. It got me to thinking would I go down that track again for various projects. Most of my stuff around home I use arduinos but.....
If I wanted to just use a microprocessor as part of another circuit/board I have the option of making a shield and plugging it in or simply programming up a chip
I then went and looked around for bits and pieces and micros in DIP format (I cant see well enough for smaller than that) and then came across things like
http://www.robot-electronics.co.uk/htm/dev-p182432.htm
So my question is what is compatible with FC6 that either via an adapter or in dip package that has 32 bit processor and lots of io's? I cant be the only one thats nearly blind
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Hi secs
Matrix do ecio which are similar the price is very comparable and cheaper in one type, the ones you are looking at should be ok, but then again the ecio devices are 100% compatible
My eyes are getting worse, so i know where you are coming from
Here is a link to the ecio pages have a look https://www.matrixtsl.com/ecio.php
Regards
Dazz
Matrix do ecio which are similar the price is very comparable and cheaper in one type, the ones you are looking at should be ok, but then again the ecio devices are 100% compatible
My eyes are getting worse, so i know where you are coming from
Here is a link to the ecio pages have a look https://www.matrixtsl.com/ecio.php
Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Hello,
The PIC18 and PIC24 device look like they will work but the bootloader will likely cause some issues as you then have to change the linker to shift your code up to the right address.
Dazz is correct when he says the ECIO's will work out the box and have been thoroughly tested with Flowcode.
At the end of the day though Flowcode can be made to work with either.
The PIC18 and PIC24 device look like they will work but the bootloader will likely cause some issues as you then have to change the linker to shift your code up to the right address.
Dazz is correct when he says the ECIO's will work out the box and have been thoroughly tested with Flowcode.
At the end of the day though Flowcode can be made to work with either.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 71
- Joined: Fri Jul 31, 2015 9:21 pm
- Has thanked: 2 times
- Been thanked: 12 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Thanks guys.
I didnt know the ECIO's were there. So will check them out now... I am sure they will do what I want
Peter
I didnt know the ECIO's were there. So will check them out now... I am sure they will do what I want
Peter
-
- Posts: 71
- Joined: Fri Jul 31, 2015 9:21 pm
- Has thanked: 2 times
- Been thanked: 12 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Yes they look quite good.
Think I will order an ARM unit to play with. Which licence do you need for that one as I only use FC now for Arduinos basically.
Peter
Think I will order an ARM unit to play with. Which licence do you need for that one as I only use FC now for Arduinos basically.
Peter
-
- Posts: 71
- Joined: Fri Jul 31, 2015 9:21 pm
- Has thanked: 2 times
- Been thanked: 12 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Should never have gone and looked at website. Now spending my next 6 months wages Found the MIACs and looking at them. I am an Electrician by trade and can see a huge cost effective use for them.
https://www.facebook.com/softwareelectr ... ns/?ref=hl
Regards, Peter
https://www.facebook.com/softwareelectr ... ns/?ref=hl
Regards, Peter
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Hi Secs
Sorry for posting the link , the miac and a few other boards are also on my to get list, if i had more money i would have 2 of everything
Also bear in mind that the support from matrix themselves is first rate and more accessible than any other company i have used in the past, also all of us vc's on here are just satisfied customers who try to help others.
Regards
Dazz
Sorry for posting the link , the miac and a few other boards are also on my to get list, if i had more money i would have 2 of everything
Also bear in mind that the support from matrix themselves is first rate and more accessible than any other company i have used in the past, also all of us vc's on here are just satisfied customers who try to help others.
Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
-
- Posts: 71
- Joined: Fri Jul 31, 2015 9:21 pm
- Has thanked: 2 times
- Been thanked: 12 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Thanks for the input Dazz. Yep like you if I had more money.......
I have posted a question in another thread to get a feel on how long the MIAC's will be around. I really am excited about using them but dont want to get going and then find they are pulled. The main module is supported in FC6 but not the other modules so this has me questioning its expected life.
I do a lot of tinkering for myself but also one only jobs for others. In fact I have a mechanical bull sitting in my workshop that looks like it needs a new controller. I think the MIAC will suit just nicely. A bit disapointed that no distributor is here in Australia to speed up delivery but hey you can't have everything.
As for support. I have found both the online stuff here and thier sales support to be A1. No problems. I am currently working with a new HMI screen at one of my jobs and would love the "Flowcode" way of doing things to be implemented in other products.
Regards, Peter
I have posted a question in another thread to get a feel on how long the MIAC's will be around. I really am excited about using them but dont want to get going and then find they are pulled. The main module is supported in FC6 but not the other modules so this has me questioning its expected life.
I do a lot of tinkering for myself but also one only jobs for others. In fact I have a mechanical bull sitting in my workshop that looks like it needs a new controller. I think the MIAC will suit just nicely. A bit disapointed that no distributor is here in Australia to speed up delivery but hey you can't have everything.
As for support. I have found both the online stuff here and thier sales support to be A1. No problems. I am currently working with a new HMI screen at one of my jobs and would love the "Flowcode" way of doing things to be implemented in other products.
Regards, Peter
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Hi
From memory the miac extras were left out of V6 due to time constraints, i think matrix are offering V5 to those who bought V6 and use the miac add on's (search the forum as there's a thread somewhere about it .
Im sure the miac will be around for a long time yet as it's a very good product, some VC's have then and im sure will add to my post later, matrix staff will probably provide a fuller answer on monday when they get back to work. also have a search on miac as there's a thread or article on someone using one in a power room fascinating stuff.
I've been lucky enough to visit matrix during the development of V6 and although the guys were very busy ,they were very welcoming and the best bit was they were all really enthusiastic about all their products, which not only rubbed of on me but also realised these guys are not only proud of their work they will go to long lengths to help
Regards
Dazz
From memory the miac extras were left out of V6 due to time constraints, i think matrix are offering V5 to those who bought V6 and use the miac add on's (search the forum as there's a thread somewhere about it .
Im sure the miac will be around for a long time yet as it's a very good product, some VC's have then and im sure will add to my post later, matrix staff will probably provide a fuller answer on monday when they get back to work. also have a search on miac as there's a thread or article on someone using one in a power room fascinating stuff.
I've been lucky enough to visit matrix during the development of V6 and although the guys were very busy ,they were very welcoming and the best bit was they were all really enthusiastic about all their products, which not only rubbed of on me but also realised these guys are not only proud of their work they will go to long lengths to help
Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
- petesmart
- Valued Contributor
- Posts: 395
- Joined: Thu May 06, 2010 11:42 am
- Location: Sydney, Australia
- Has thanked: 187 times
- Been thanked: 140 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Hi Peter,
I am based in Sydney and have been using MIAC and expansion modules for quite a while now... Leigh from MM is your man to support you, he is very knowledgable and works down to the firmware level.
As I'm in your timezone, happy to assist, pm me and I will give you my phone number so we can chat..
Best
Pete
I am based in Sydney and have been using MIAC and expansion modules for quite a while now... Leigh from MM is your man to support you, he is very knowledgable and works down to the firmware level.
As I'm in your timezone, happy to assist, pm me and I will give you my phone number so we can chat..
Best
Pete
sorry about that Chief!
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: Flowcode and hardware (slightly off topic)
Hi
Forgot to mention this thread http://www.matrixtsl.com/mmforums/viewt ... 54&t=16640, now if this doesn't make you hit the bank card nothing will, it's a good offer
Regards
Dazz
Forgot to mention this thread http://www.matrixtsl.com/mmforums/viewt ... 54&t=16640, now if this doesn't make you hit the bank card nothing will, it's a good offer
Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php