Bonjour,
Je voudrais savoir si je peux programmer avec flowcode v6.1.3.2 un Arduino MEGA et si il y a des tutoriels a ce sujet?
Merci a tous,
Chris
Arduino MEGA avec flowcode V6?
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Arduino MEGA avec flowcode V6?
Salut chris,
Vous pouvez certainement, il ya un guide Arduino débutants disponibles ici qui devrait aider.
http://www.matrixtsl.com/wiki/index.php ... To_Program
La version R3 du Mega ne doit pas nécessairement être programmée avec le fichier hex Flowcode à l'aide de Xloader.
http://russemotto.com/xloader/
Hi Chris,
You certainly can, there is an Arduino beginners guide available here which should help.
http://www.matrixtsl.com/wiki/index.php ... To_Program
The none R3 version of the Mega may need to be programmed with the Flowcode hex file using Xloader.
http://russemotto.com/xloader/
Vous pouvez certainement, il ya un guide Arduino débutants disponibles ici qui devrait aider.
http://www.matrixtsl.com/wiki/index.php ... To_Program
La version R3 du Mega ne doit pas nécessairement être programmée avec le fichier hex Flowcode à l'aide de Xloader.
http://russemotto.com/xloader/
Hi Chris,
You certainly can, there is an Arduino beginners guide available here which should help.
http://www.matrixtsl.com/wiki/index.php ... To_Program
The none R3 version of the Mega may need to be programmed with the Flowcode hex file using Xloader.
http://russemotto.com/xloader/
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel