Component: LED MultiColour Bi (5mm, PCB) (Outputs: LEDs)
Author | Matrix Ltd |
Version | 1.1 (Release) |
Category | Outputs: LEDs |
Contents
LED MultiColour Bi (5mm, PCB) component
An industry standard 5mm diameter bi-colour LED. Any color may be chosen, and the leads trimmed to length.
Examples
A Bi Colour LED should be connected between two microcontroller I/O pins as shown below.
The series resistor can be on either side of the LED and acts to protect the LED from damage due to excess current. The value of resistor used can be changed based on the brightness of the LED and power consumption.
This LED Calculator tool is a good resource for calculating the correct LED series protection resistor.
Downloadable macro reference
LEDOff
Switches off the LED
Parameters
- This macro has no parameters
Return value
- This call does not return a value
LEDSetState
Controls the state of the LED.
0=Off
1=LED Colour 1
2=LED Colour 2
Parameters
- BYTE State
- 0=Off, 1=Pin1 High & Pin2 Low, 2=Pin1 Low & Pin2 High
Return value
- This call does not return a value
LEDOneOn
Switches on LED one
Parameters
- This macro has no parameters
Return value
- This call does not return a value
LEDTwoOn
Switches on LED two
Parameters
- This macro has no parameters
Return value
- This call does not return a value
Simulation macro reference
This component does not contain any simulation macros
Property reference
Pin
This property is of type Single digital pin and can be referenced with the variable name pin.
LED Pin 1
Pin2
This property is of type Single digital pin and can be referenced with the variable name pin2.
LED Pin 2
Color
This property is of type Color picker and can be referenced with the variable name on_color.
The color of the LED when pin1 is turned on and pin2 is turned off.
Color2
This property is of type Color picker and can be referenced with the variable name on_colour2.
The color of the LED when pin1 is turned off and pin2 is turned on.
Trim Leads
This property is of type Floating point and can be referenced with the variable name length.
Trim the length of the two leads.
Length cannot be less than 3.0, or greater than the length as supplied.
Color
This property is of type Color picker and can be referenced with the variable name label_color.
Color of the labels text.
Scale
This property is of type Floating point and can be referenced with the variable name label_scale.
Sets the basic size (text height) of the labels.
Follow Zoom
This property is of type True or false and can be referenced with the variable name label_auto_scale.
Whether labels get bigger and smaller when the panel is zoomed in and out.