MODBUS (slave)
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: MODBUS (slave)
Hello,
I believe this is currently being worked on by one of our users. Who else would like to see a MODBUS Slave component as part of the Flowcode offering?
I believe this is currently being worked on by one of our users. Who else would like to see a MODBUS Slave component as part of the Flowcode offering?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: MODBUS (slave)
i want to explain one more time who is not use mode bus or don't know modbus.
Modbus is a wonderfull protocol have a long distance.Useing RS485 protocol.
Normally PLC machines used much.If you want to build small components as a slave of an PLC system you will need modbus slave functions.
Some of the flowcode users build this with rs 232 functions i really don't know is it working or not.
The way is soo long and a little bit complex when you try to use RS485 protocol with RS232.
One day all of flowcode users will need this slave component in his or her project.
Please support me
i bleave that benj can do this like a toy
but me it's complicated.Thats why i need modbus slave component.
Modbus is a wonderfull protocol have a long distance.Useing RS485 protocol.
Normally PLC machines used much.If you want to build small components as a slave of an PLC system you will need modbus slave functions.
Some of the flowcode users build this with rs 232 functions i really don't know is it working or not.
The way is soo long and a little bit complex when you try to use RS485 protocol with RS232.
One day all of flowcode users will need this slave component in his or her project.
Please support me
i bleave that benj can do this like a toy
but me it's complicated.Thats why i need modbus slave component.
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: MODBUS (slave)
+1 This is an important protocol for Industrial Applications I support the request 100%
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: MODBUS (slave)
Thank you QMESAR for youre support. God bless you.QMESAR wrote:+1 This is an important protocol for Industrial Applications I support the request 100%
i am trying to do it by RS232 style but too long and make so many mistakes
PLS we need more support.
New flowcode users thrust me u will need this protocol one day.
And that day you will remember my calling to support
-
- Posts: 31
- Joined: Wed May 02, 2012 5:49 pm
- Has thanked: 3 times
- Been thanked: 7 times
- Contact:
Re: MODBUS (slave)
Hello
Here is the current version of my MODBUS slave FLOWCODE components.
Everything starts with MODBUS_master_requesting component.... So after you receive data to UART you will call that macro.
This version is working fine with industrial Touch panels. Master writing multiple INTs command is not complete, because i havent needed it so far
Here is the current version of my MODBUS slave FLOWCODE components.
Everything starts with MODBUS_master_requesting component.... So after you receive data to UART you will call that macro.
This version is working fine with industrial Touch panels. Master writing multiple INTs command is not complete, because i havent needed it so far
- Attachments
-
- MODBUS_slave.zip
- (9.02 KiB) Downloaded 658 times
-
- Posts: 12
- Joined: Sun Nov 09, 2014 5:53 pm
- Location: Oman/India
- Has thanked: 5 times
- Been thanked: 2 times
- Contact:
Re: MODBUS (slave)
Dear Matrix team,
Yes, the Modbus RTU slave component will be a great addition. Kindly consider including this as one of the priorities.
Thanks in advance.
Yes, the Modbus RTU slave component will be a great addition. Kindly consider including this as one of the priorities.
Thanks in advance.
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: MODBUS (slave)
files end with .fcmzadah wrote:Hello
Here is the current version of my MODBUS slave FLOWCODE components.
Everything starts with MODBUS_master_requesting component.... So after you receive data to UART you will call that macro.
This version is working fine with industrial Touch panels. Master writing multiple INTs command is not complete, because i havent needed it so far
how to open these?
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: MODBUS (slave)
If post a flowchart you would like to import macro with, then I will import it for you and post modified flowchart.
Martin
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: MODBUS (slave)
I have just checked and macros posted are for Flowcode V5.
That is why you're having trouble importing.
The only way you can do this is to import into a Flowcode V5, save flowchart then load Flowchart V6 with the V5 saved flowchart.
I have done this for you but not all macros are there.
You will need to add a send macro etc.
That is why you're having trouble importing.
The only way you can do this is to import into a Flowcode V5, save flowchart then load Flowchart V6 with the V5 saved flowchart.
I have done this for you but not all macros are there.
You will need to add a send macro etc.
- Attachments
-
- Modbus Slave_v6.fcfx
- (32 KiB) Downloaded 382 times
Martin
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: MODBUS (slave)
i do not have flowcode v5
see the problems?
V6 needs modbus slave component
or i will give bribery to benj to do this
ok benj 1 kg Turkish baklava is enough for you?
see the problems?
V6 needs modbus slave component
or i will give bribery to benj to do this
ok benj 1 kg Turkish baklava is enough for you?
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: MODBUS (slave)
come on guys i need some support for this action.
Thrust me one day u will need this protocol.
Thrust me one day u will need this protocol.
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: MODBUS (slave)
I Agree this would be nice addition to flowcode ,
Would it be possible to have selectable baud rates , selectable parity's
Steve
Would it be possible to have selectable baud rates , selectable parity's
Steve
Success always occurs in private and failure in full view.
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: MODBUS (slave)
Re: Modbus
Postby Benj » Fri Aug 30, 2013 5:25 pm
Hello,
Ok in PatchSet 4 the Modbus component should be complete and should work correctly. I'm a bit unsure as the guide I was following sent the data MSB first but then sent the CRC LSB first so might be a few remaining issues to iron out.
If anyone tries the component with Modbus hardware then let me know how your getting on and I will do my best to help out.
Modbus slave component would also be a nice feature so I will make sure it is on the list.
hmmmm benj also supporting me too
there is nothing to afraid if benj is behind me
you can escape but you can't hide
come on..... you also know this will be a great feature for flowcode
We can build small parts for big systems. (one of my dream)
Postby Benj » Fri Aug 30, 2013 5:25 pm
Hello,
Ok in PatchSet 4 the Modbus component should be complete and should work correctly. I'm a bit unsure as the guide I was following sent the data MSB first but then sent the CRC LSB first so might be a few remaining issues to iron out.
If anyone tries the component with Modbus hardware then let me know how your getting on and I will do my best to help out.
Modbus slave component would also be a nice feature so I will make sure it is on the list.
hmmmm benj also supporting me too
there is nothing to afraid if benj is behind me
you can escape but you can't hide
come on..... you also know this will be a great feature for flowcode
We can build small parts for big systems. (one of my dream)
- DavidA
- Matrix Staff
- Posts: 1076
- Joined: Fri Apr 23, 2010 2:18 pm
- Location: Matrix Multimedia Ltd
- Has thanked: 58 times
- Been thanked: 258 times
- Contact:
Re: MODBUS (slave)
Hello,
Im locking this topic now. Please continue this subject with Ben or Me only via PM. Other forum members help out because they are good helpful people and not because of some obligation. Please do not spam PMs to users on this subject else i will have to warn/ban any account doing this.
*edit: unlocking topic on request, please no more spam in this topic.
Im locking this topic now. Please continue this subject with Ben or Me only via PM. Other forum members help out because they are good helpful people and not because of some obligation. Please do not spam PMs to users on this subject else i will have to warn/ban any account doing this.
*edit: unlocking topic on request, please no more spam in this topic.
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: MODBUS (slave)
I am very very sorry to forum users and admins.DavidA wrote:Hello,
Im locking this topic now. Please continue this subject with Ben or Me only via PM. Other forum members help out because they are good helpful people and not because of some obligation. Please do not spam PMs to users on this subject else i will have to warn/ban any account doing this.
*edit: unlocking topic on request, please no more spam in this topic.
I think i go so far and push people to do my needs.
i acked like a child.
This will never happen again i promise.