Hi,
I tink I am magnet for problems with Flowcode.
I just played with the software come up with LCD to print Keypad numbers but as soon as I clicked Keypad icon to add it flowcode stopped. Attached is the message which does not make any sense to me
I have tried to restart Flowcode, I have tried to restart Windows, I have started ne project still no go!
Any idea?
thanks
Josef
Another interesting flowcode freezes
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Another interesting flowcode freezes
Hello Josef
Thats quite strange, not seen this before. Are you running any overly severe firewall or antivirus software such as mcaffee or norton? Maybe worth uninstalling and reinstalling Flowcode to see if this fixes the problem.
Thats quite strange, not seen this before. Are you running any overly severe firewall or antivirus software such as mcaffee or norton? Maybe worth uninstalling and reinstalling Flowcode to see if this fixes the problem.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Another interesting flowcode freezes
I saw this once on a PC, but the problem went away and never returned.
I've done quite a thorough search about this problem and I've not found anything that seems likely. Ben's right - it could be some kind of aggressive anti-virus program that is interfering with Flowcode's interface with its components. I've also seen that this problem can occur if the PC is very low on resources.
I've done quite a thorough search about this problem and I've not found anything that seems likely. Ben's right - it could be some kind of aggressive anti-virus program that is interfering with Flowcode's interface with its components. I've also seen that this problem can occur if the PC is very low on resources.
-
- Flowcode V4 User
- Posts: 40
- Joined: Sun Feb 22, 2009 6:54 am
- Location: Sydney
- Has thanked: 2 times
- Contact:
Re: Another interesting flowcode freezes
Hi Ben,
Just tried to reinstall and is still the same. I am running XP Tablet PC Edition 2005, Version 2002 with SP3 antivirus is Avast and Firewall Win XP
Josef
Just tried to reinstall and is still the same. I am running XP Tablet PC Edition 2005, Version 2002 with SP3 antivirus is Avast and Firewall Win XP
Josef
-
- Flowcode V4 User
- Posts: 40
- Joined: Sun Feb 22, 2009 6:54 am
- Location: Sydney
- Has thanked: 2 times
- Contact:
Re: Another interesting flowcode freezes
I tried to trick it. Designed flowchart with keypad on another computer (the one which does not compile) and opend it on theis tablet. it did open it but it was really funny (see attached).
Josef
Josef
- Attachments
-
- Fault-Keypad.jpg (3.22 KiB) Viewed 11898 times
-
- Flowcode V4 User
- Posts: 40
- Joined: Sun Feb 22, 2009 6:54 am
- Location: Sydney
- Has thanked: 2 times
- Contact:
Re: Another interesting flowcode freezes
Hi,
I am just wondering if you guys had a look at this problem? I would love to rune flowcode on that computer but everytime I try to run it it freezes.
thank you
Josef
I am just wondering if you guys had a look at this problem? I would love to rune flowcode on that computer but everytime I try to run it it freezes.
thank you
Josef
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Another interesting flowcode freezes
Hi,
Problems like this are very difficult to solve without having direct access to the PC, so I don't really know what else to try.
Have you tried running your PC in safe mode and then running Flowcode? You could also try to temporarily disable your antivirus (etc) programs when running, to see if they are causing any incompatabilities.
All I can tell you is that it's unlikely to be a problem with Flowcode itself - we have thousands of Flowcode users who do not report this problem. More likely it is caused by an incompatability between Flowcode and another program you have running, or there is an issue with your PC registry/permissions/settings/etc.
I truly would love to solve this for you, but I don't know what else we can try here. Has anyone else on the forum had any similar problems and found a suitable fix or workaround??
Problems like this are very difficult to solve without having direct access to the PC, so I don't really know what else to try.
Have you tried running your PC in safe mode and then running Flowcode? You could also try to temporarily disable your antivirus (etc) programs when running, to see if they are causing any incompatabilities.
All I can tell you is that it's unlikely to be a problem with Flowcode itself - we have thousands of Flowcode users who do not report this problem. More likely it is caused by an incompatability between Flowcode and another program you have running, or there is an issue with your PC registry/permissions/settings/etc.
I truly would love to solve this for you, but I don't know what else we can try here. Has anyone else on the forum had any similar problems and found a suitable fix or workaround??
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Another interesting flowcode freezes
I've posted another commetn on this here that may help:
http://www.matrixmultimedia.com/mmforum ... 869#p12869
http://www.matrixmultimedia.com/mmforum ... 869#p12869