As usual, any help will be appreciated.
Launching the compiler...
C:\Program Files (x86)\Flowcode 7\compilers\pic32\bin\xc32-gcc.exe -mprocessor=32MZ2048ECM064 -O1 -o "C:\prj\SMM\SMM.out" "C:\prj\SMM\SMM.c"
In file included from C:\prj\SMM\SMM.c:83:0:
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_UART.c: In function 'FC_CAL_UART_Init_5':
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_UART.c:173:36: error: 'MX_HARD_BAUD_5' undeclared (first use in this function)
#define MX_UART_BAUD_X CAL_APPEND(MX_HARD_BAUD_, MX_UART_NUM)
^
C:\Program Files (x86)\Flowcode 7\CAL\internals.c:65:26: note: in definition of macro 'CAL_APD'
#define CAL_APD(a, b) a##b
^
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_UART.c:173:25: note: in expansion of macro 'CAL_APPEND'
#define MX_UART_BAUD_X CAL_APPEND(MX_HARD_BAUD_, MX_UART_NUM)
^
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_UART.c:339:11: note: in expansion of macro 'MX_UART_BAUD_X'
U4BRG = MX_UART_BAUD_X; // Set the baud rate
^
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_UART.c:173:36: note: each undeclared identifier is reported only once for each function it appears in
#define MX_UART_BAUD_X CAL_APPEND(MX_HARD_BAUD_, MX_UART_NUM)
^
C:\Program Files (x86)\Flowcode 7\CAL\internals.c:65:26: note: in definition of macro 'CAL_APD'
#define CAL_APD(a, b) a##b
^
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_UART.c:173:25: note: in expansion of macro 'CAL_APPEND'
#define MX_UART_BAUD_X CAL_APPEND(MX_HARD_BAUD_, MX_UART_NUM)
^
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_UART.c:339:11: note: in expansion of macro 'MX_UART_BAUD_X'
U4BRG = MX_UART_BAUD_X; // Set the baud rate
^ ^
(..)