Gentlemen,
I would like to know if it is possible to use directly, from FC7, Microchip's Real Ice programmer to program and/or debug a pic microcontroller.
Actually what I have done is to produce the .hex file and load it to the IPE application from Microchip, but it will be great if this device could be used directly with FC7.
Thanks.
Roberto Iglesias N.
Inversiones Rintronic C.A.
riglesias@rintronic.com
http://www.rintronic.com
********************************
Real Ice programmer debugger
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Real Ice programmer debugger
Hello Roberto,
As your already using the MPLABX IPE software there is a way to allow Flowcode to use this directly using the compile to chip menu item.
Details for a PICkit 3 are available below. You would just have to substitute the /TPPK3 in the parameters with the appropriate tag for the Real ICE which looks to be /TPRICE.
https://www.matrixtsl.com/wikiv7/index. ... _.28NEW.29
Currently there is no debugging support, programming only.
Let us know how you get on.
As your already using the MPLABX IPE software there is a way to allow Flowcode to use this directly using the compile to chip menu item.
Details for a PICkit 3 are available below. You would just have to substitute the /TPPK3 in the parameters with the appropriate tag for the Real ICE which looks to be /TPRICE.
https://www.matrixtsl.com/wikiv7/index. ... _.28NEW.29
Currently there is no debugging support, programming only.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Real Ice programmer debugger
Hi BenJ,
Thanks for your reply.
Yes, the setting you mentioned worked perfectly well, now I can program my designs directly from FC7 to the target via Real Ice, also I tested ICD3 and PM.
Hope Debugger could be included for Real Ice in the future.
Thanks.
Regards,
Roberto Iglesias
Inversiones Rintronic C.A.
www.rintronic.com
********************************
Thanks for your reply.
Yes, the setting you mentioned worked perfectly well, now I can program my designs directly from FC7 to the target via Real Ice, also I tested ICD3 and PM.
Hope Debugger could be included for Real Ice in the future.
Thanks.
Regards,
Roberto Iglesias
Inversiones Rintronic C.A.
www.rintronic.com
********************************