ESP32 programmer board

The 32-bit ESP32 Programmer (BL0058) can be used with various programming languages including Assembly, C and Flowcode.  To program the ESP32 on the board, a free serial tool is available as part of the standard Flowcode or Arduino IDE installation.

The board hosts a powerful ESP32 microcontroller featuring dual core 240MHz 32-bit processor complete with built in Bluetooth and WIFI communications. The board presents all port pins collected together as E-blocks2 sockets and takes power from an external power supply or from the micro USB port.

New features in E-blocks2 include:

• Power now routed via the connector - no more flying leads
• Board auto ID functionality
• Flowcode automatic project set up
• Smaller footprint using up to date surface mount technology
• Over current resettable fuse protection

Ghost

The E-blocks2 board is compatible with Ghost technology.  Using the board with Flowcode allows the use of the advanced Ghost debugging features including in circuit debugging, real time pin monitoring and bus decoding. 

E-blocks > E-blocks2

If using this board with First Generation downstream E-blocks, then you will need an E-blocks2 upstream to E-blocks downstream connector.