course icon
 

Matrix TSL Learning and Teaching Courses

Principles of lighting level 3


CP2273
These worksheets teach the principles of designing lighting systems for domestic and industrial buildings.


Suitable for: LK2285

Automatics Electro-pneumatics


CP2079
Enhance your knowledge of pneumatic systems with electrically operated valves and sensors.


Suitable for: AU9015

Aerodynamics


CP0704
Using the bench-top wind tunnel, teach aerodynamics and the principles of fluid flow.


Suitable for: AV5289

Mechanisms Fundamentals


CP2840
This module allows students to investigate systems using gears, belts and linkages using practical investigations.


Suitable for: FM0759 FM9458-2

Operational amplifiers


CP3061
A series of experiments which investigate the properties and function of operational amplifiers.


Electrical installation 1


CP4098
Future plumbers or electricians can gain a fundamental understanding of the basic principles of electricity.


Suitable for: LK5000

Intro to motors, generators and hybrids


CP8822
Automotive students can investigate the principles behind motors and generators and understand hybrid vehicles.


Intermediate Electronic Engineering


CP8293
An introduction to electronics through a series of practical experiments from bulbs in series to radio circuits.


Suitable for: LK3889-2

Industrial Sense and Control


CP7718
Sensors and control systems - components, circuit diagrams and the Programmable Logic Controller (PLC).


Hybrid Vehicle System


LK4483
This course covers the basic principles and concepts involved in hybrid vehicle design and implementation.


Suitable for: LK6483

Fundamentals of electricity


CP6816
The fundamentals of electricity. Ideal for those who are new to the subject. Suitable for use from age 8+.


Suitable for: LK6444

Three phase


CP2686
The course introduces students to concepts used in three-phase electrical transmission and utilisation.


Suitable for: LK4961

Sequential logic


CP9945
Understanding sequential logic circuits and systems, including flip flop operation.


Suitable for: LK9422 LK6905

Intermediate electrical and electronic engineering


CP4583
A series of practical activities for intermediate level courses in electrical and electronic principles.


Suitable for: LK9862

Electronic components and circuits 2


CP2813
This course introduces students to a range of components found in domestic and industrial electrical installations.


Suitable for: LK2901

Electrical installation 3


CP0295
Learn the concepts used in domestic and industrial electrical installation, including RCDs and circuit breakers.


Suitable for: LK4562

Transformer construction and operation


CP1933
Study how transformers work, Lenz’s Law and several different properties of induced magnetism.


Suitable for: LK1989

Fault finding


CP9333
Fault finding on analogue and digital systems, using test equipment to deduce faults.


Suitable for: LK3566

Energy and the environment


CP7122
Energy resources and consumption, including renewable energy generation and energy saving measures.


Suitable for: LK6802 LK7345-2

Advanced electrical principles - AC


CP8749
Understanding circuits to analyse voltage, reactive components, amplifiers, digital components & logic circuits.


Suitable for: LK9044

AC Principles


CP8392
Introducing students to the use of AC devices and electrical principles in automotive electrical technology.


Suitable for: LK4500CUS LK8222

Power and energy electronics


CP3666
The concepts and devices used in a range of systems to deliver and control electrical power.


Suitable for: LK3568

Advanced electrical principles - DC


CP8473
Understanding circuits to analyse voltage, reactive components, amplifiers, digital components & logic circuits.


Suitable for: LK9044

Combinational logic


CP2094
An introduction to individual logic gates, and how they can be constructed from other logic gates.


Suitable for: LK9422 LK6904

Transistor Amplifier


LK4403
This course explores the use of bipolar and field effect transistors in switching and in amplifier circuits.


Suitable for: LK9422 LK9435

Electricity Matters 1


CP7325
This course teaches the basic concept in electricity, circuits and magnetism.


Suitable for: LK9071-2

Electricity Matters 2


CP7326
This course teaches the basic concept in electricity, circuits and magnetism.


Suitable for: LK9071-2

Electricity Matters 3


CP7664
The basic principles of electricity, including electrical measurements, ammeters, voltmeters and multimeters.


Suitable for: LK9329-2

Electricity Matters 4


CP7773
The basic principles of electricity, including electrical measurements, ammeters, voltmeters and multimeters.


Suitable for: LK9329-2

EASA Electronic Fundamentals 1


CP7419
For the European Safety Agency (EASA) Module 4 - electronic fundamentals - for aircraft maintenance engineers.


Suitable for: LK9282 LK9672

EASA Electronic Fundamentals 2


LK7422
For the European Safety Agency (EASA) Module 4 - electronic fundamentals - for aircraft maintenance engineers.


Suitable for: LK9282 LK9672

EASA Electronic Fundamentals 3


CP7426
For the European Safety Agency (EASA) Module 4 - electronic fundamentals - for aircraft maintenance engineers.


Suitable for: LK9282 LK9672

EASA Electronic Fundamentals 4


CP7430
For the European Safety Agency (EASA) Module 4 - electronic fundamentals - for aircraft maintenance engineers.


Suitable for: LK9282

EASA Electrical Fundamentals 1


CP7378
For the European Safety Agency (EASA) Module 3 - electrical fundamentals - for aircraft maintenance engineers.


Suitable for: LK9339

EASA Electrical Fundamentals 2


CP7381
For the European Safety Agency (EASA) Module 3 - electrical fundamentals - for aircraft maintenance engineers.


Suitable for: LK9339

EASA Electrical Fundamentals 3


CP7393
For the European Safety Agency (EASA) Module 3 - electrical fundamentals - for aircraft maintenance engineers.


Suitable for: LK9339

EASA Electrical Fundamentals 4


CP7415
For the European Safety Agency (EASA) Module 3 - electrical fundamentals - for aircraft maintenance engineers.


Suitable for: LK9339

Advanced electronic principles Intro


CP3008
Worksheets covering a wide range of components & circuits, from diode circuits to feedback & oscillator design.


Suitable for: LK6804

Advanced electronic principles pt1


CP3008
Worksheets covering a wide range of components & circuits, from diode circuits to feedback & oscillator design.


Suitable for: LK6804

Advanced electronic principles pt2


CP3008
Worksheets covering a wide range of components & circuits, from diode circuits to feedback & oscillator design.


Suitable for: LK6804

Advanced electronic principles pt3


CP3008
Worksheets covering a wide range of components & circuits, from diode circuits to feedback & oscillator design.


Suitable for: LK6804

Advanced electronic principles pt4


CP3008
Worksheets covering a wide range of components & circuits, from diode circuits to feedback & oscillator design.


Suitable for: LK6804

Automatics Control


CP4956
Learn how the combination of a controller and software can create powerful and flexible pneumatic systems.


Suitable for: HP4550-V2 AU6781

Automatics Essentials


CP2080
A complete course in pneumatic circuit design and construction.


Suitable for: HP4550-V2 AU9020

Automatics Control Plus


AW4957
Learn how the combination of a controller and software can create powerful and flexible pneumatic systems.


Suitable for: AU6781 AU9010

Robotics Course - Instructional Guide


CP5894
Learn how navigate a maze, play music, record audio and much more with the AllCode robot.


Introduction to microcontroller programming


CP4375
In our BTEC compatible course, learn how to program microcontrollers and how to construct circuits and systems.


Manufacturing Engineering: CNC machining


CP7449
MicroCNC a low voltage, cost effective introduction to manufacturing engineering principles.


Thermodynamics


CP4261
The Thermodynamics course demonstrates temperature related behaviour of mechanical systems.


Suitable for: HP4159

Source - Worksheets


CP7670
The Source PSU AC/DC PSU and signal generator comes with a series of worksheets for students to go through.


Suitable for: LK6999 LK2975

Electrical installation 2


CP8475
A range of assignments in electricity, basic circuits and the use of multimeters for measuring and fault diagnosis.


Suitable for: LK2901 LK4063

Field-Programmable Gate Array (FPGA)


CP3811
The course intention is to teach FPGA programming in a either a block diagram or high-level descriptive language.


Suitable for: EB940-2 BL0580

CAN bus Communications


CP2793
This course is designed to introduce concepts required to understand CAN networks and provide practical exercises.


Suitable for: BL0589 BL0587

Embedded Internet Communications


CP4895
This training course is designed to introduce the concepts required to understand the communication protocol TCP/IP


Suitable for: BL0531 BL0535

RFID Systems


CP9329
The principal aim of this course is to introduce the student to the concepts involved in RFID


Suitable for: BL0510 BL0548

GSM Communications


CP2832
The mobile phone solution provides a practical introduction to modern communication systems


Suitable for: BL0579 BL0521

Zigbee Communications


CP3924
The principal aim of this course is to introduce you to the concepts involved in ZigBee networks


Suitable for: BL0536 BL0516

Bluetooth Communications


CP1795
Learn the concepts and strategies required for practical Bluetooth communications.


Suitable for: BL0506 BL0563

Automatics Control - Siemens


CP1989
Learn how a Siemens controller and software can create powerful and flexible pneumatic systems.


Suitable for: AU9077

Automatics Control PLUS - Siemens


CP2193
Learn how a Siemens controller and software can create powerful and flexible pneumatic systems.


Suitable for: AU9077

Systems, Signals, DSP and FFT


CP2398
The Systems, signals, DSP and FFT pack introduces students to a number concepts in digital systems.


Suitable for: BL8533 CP2398

Electrical Machine Systems


CP6490
Teaches students electrical machine operation, their speed/torque characteristics and the circuits and power suppli


Suitable for: EM6637

Electrical Machines and MATLAB Control


CP8385
Teaches students how to use MATLAB to measure the characteristics of electrical machines.


Suitable for: EM6637

Audio DSP


CP3130
The principal aim of thecourse is to enableyou to use Flowcode to program the dsPIC microcontroller


Suitable for: BL0573

Electrical Installation Level 3


CP4160
The course aims to prepare you for the following units within City and Guilds diplomas 2357 and 2365-03.


Suitable for: EM6637

Electrical machines level 5


CP9989
Introduces students to more advanced concepts and models of electrical machines and focuses particularly on buildin


Suitable for: EM6637

Robot arm development 2


CP5390
Learn how to programme the AllCode robot arm in manual movement, automatic pick & place, API control and more.


Suitable for: RB1387

Process Control Systems


CP3720
Understanding Process Control and various related worksheets.


Automotive electricity


CP4388
Curriculum on learning about automotive electricty using Locktronics


Suitable for: LK2240

Automotive fault finding


CP0687
Fault finding using Locktronics for Automotive systems


Suitable for: LK8170

Automotive motors, generators & charging


CP5937
Learn how motors, generators and charging is important to an Automotive system.


Suitable for: LK2410

Automotive high voltage battery circuits


CP6290
Learn about high voltage batteries in an automotive environment


Suitable for: LK5281

Automotive ECU's, architecture and logic


CP8408
Learn about ECU architecture and logic within an Automotive environment with Locktronics


Suitable for: LK1800

Automotive Oscilloscope Use


CP5950
As vehicles are getting more sophisticated, an oscilloscope is a great tool for capturing signals and displaying th


Suitable for: LK9155

Smart Factory


CP7329
Use the Smart Factory to learn about how modern factorys and smart system work.


Suitable for: AU4956 AU0205

Automatics Control Plus - Aug2021+


CP4957
Learn how the combination of a controller and software can create powerful and flexible pneumatic systems.


Suitable for: AU6781

Music with microcontrollers


CP1210
Construct a wide variety of digital music applications and understand the principles of digital music.


Suitable for: BL8533

Statics


CP6368
Curriculum on Static forces for mechanical engineering teaching


Suitable for: FM1883 FM9458-2

Materials Fundamentals


CP0876
Learn about the behaviour of material properties under different types of forces


Suitable for: FM1292 FM9458-2

Dynamics Fundamentals


CP1505
Curriculum on Dynamic forces for mechanical engineering teaching


Suitable for: FM3935 FM9458-2

Bending Moments


CP1843
Full curriculum on bending moments


Suitable for: ST8801

Deflection of Beams


CP1879
Curriculum on Deflection of Beams.


Suitable for: ST9544

Simply Supported Beams


CP3604
This module allows students to investigate the effects of forces generated in simple beam structures through a stru


Suitable for: ST0454

Shear Force


CP4708
This course teaches students the principle of Shear Force by applying loads on hangers to a suspended beam in varyi


Suitable for: ST4484

Pin Jointed Frameworks


CP8026
Investigations examine the load distribution within a structural framework, consisting of six members linked by pi


Suitable for: ST6365

Torsion of Rods


CP8231
The equipment allows the user to measure the torsion resulting from twisting one end of a metal rod.


Suitable for: ST0386

Power Systems


CP7128
A full curriculum on renewable power systems


Suitable for: LK6946

Bending Stress


CP1877
Curriculum on Bending stress


Suitable for: ST5671

Fundamental Fluids


CP2599
Learn about Fluid dynamics with this partner curriculum for the Fundamental Fluids workstation.


Suitable for: FM1000

Sense and Control


CP7241
Course designed to introduce students to sense and control in an automotive environment.


Suitable for: LK1142

CAN bus under the hood


CP0411
In depth look at CAN bus systems in automotive vehicles.


Suitable for: LK0235

CAN bus and LIN bus Fundamentals


CP0607
Helps students undertand the fundamental aspects of CAN and LIN bus


Suitable for: LK0235

Digital techniques in aviation


CP7224
Using Digital Techniques to understand aviation principles


Suitable for: BL2976 AV3986

Electronic Flight Information Systems


CP5715
Data transmitted from sensor to display in aeronautic systems


Suitable for: AV3737 AV3986

Communications and Digital Radio techniques


CP6125
Teach students about communications and digital radio techniques.


Suitable for: BL8590

Robot Arm - Pendant programming


CP9125
This course consists of a number of worksheets that take students through the concepts of robot arm programming us


Suitable for: RB1387