Sysblocks board

SKU#: BL2251

Sysblocks board

Sysblocks has four analogue inputs, two analogue outputs and support circuitry. The 32 bit PICmicro microcontroller is programmed by a host device which is a standard 18 series PICmicro microcontroller. This host device takes care of non-core tasks like USB communications, LCD display, encoder and switch inputs. This architecture keeps the main 32bit device free for signal processing.

Two E-blocks ports are made available for expansion. E-block boards for Wifi, keypad, Bluetooth, CAN, Zigbee and many other functions are available, along with a Grove connector, giving huge flexibility. The analogue input signals are buffered and level shifted to half of the supply voltage – 1.65V – and then fed to the internal A to D converters of the main 32 bit PICmicro microcontroller.

A digital potentiometer allows the level of the input signals to be adjusted in software. The board is fitted with a number of switches and encoders for control purposes. The board also has a miniature monochrome graphical display and a number of programmable LEDs including 2 x 8 LED VU meter LEDs. The board is powered from 3.3V from USB or from a plug top power supply.

Included with this board:

1 x BL2461 Sysblocks PCB

2 x BL4585 BNC to SMA adaptor

2 x BL6889 SMA to SMA lead

1 x BL6374 BNC splitter

1 x HP6400 3.5mm to 3.5mm jack lead.

1 x HPUSB USB lead

 

Pictures are a representation of the product and correct at the time of uploading. Occasionally there may be changes to equipment for supplier or development reasons which may not be reflected. Please check the bill of materials before purchase to confirm the contents that you will receive.

£250.00 Ex VAT