Matrix - Programming chips in custom circuitry on the EB006

Programming chips in custom circuitry on the EB006

Using the EB006 or the HP488 PICmicro programming boards it is possible to directly program a PICmicro device that is plugged into its own circuit board.

This means you can have the PICmicro plugged into a custom PCB and program the device without having to keep removing and inserting the PICmicro device into a progammer.

To do this you will have to either create a standard ICSP header on your custom circuit board or wire the connections directly to the Pins of your microcontroller.

Here is a schematic of the connections that need to be made from the EB006 or HP488 boards. You could use a DIL socket so that you can detatch the programming cable from the EB006 if you wish. Otherwise you can solder directly to the header. ... _HP488.gif

The ICSP connector has the following connections to your remote PICmicro device.

1 - MCLR
2 - VCC
3 - GND
4 - RB7 - PGD
5 - RB6 - PGC
6 - NC

A more detailed explaination of the Microchip ICSP standard can be found here. ... 30277d.pdf
Last update:
2015-03-31 12:06
Average rating:0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Home | Website Disclaimer | Returns Policy | Privacy Policy | Copyright Matrix Technology Solutions Ltd 2020
Chinese German Spanish French Greek Italian Dutch Russian Google translations