If your Flowcode has a pop up screen saying that you have between 1 and 30 days remaining before the product reverts to a demo mode, then you will need to activate your Flowcode licence.

There are two ways of doing this:

1) Automatically via the Internet

If the computer with Flowcode has access to the internet then you will be able to automatically register Flowcode quickly and easily.

To do this simply load up Flowcode and click on the “Activate” button (highlighted by the red circle in the picture below).

If your “Activate” button is greyed out, please see this FAQ topic here:

<...>
If you do not have access to the internet on your computer or you have a firewall or other restrictions on the internet then please see option 2 below:

2) Manually via a Username and Activation Key from Matrix

Using this method assumes that you do not have access to the internet on your computer, and should only be used if this is the case.

a) The first step is to contact Matrix to request your Username and Activation Key. Use this contact form:
http://www.matrixtsl.com/contact2.php?p=1&s=3
Remember to include your licence code, also state that you require the Username and Activation Key.
b) Load up Flowcode
c) Click on the ‘Enter Key’ button, a window will pop up asking for Administrator rights, click ‘OK’.
d) Click on the ‘Unlock’ button in the bottom section.

e) Enter the Username and Activation Key as shown in the picture below (green circle) then click Apply (red circle).